Fixings & accesories for plasterboard - KITINPIN

KIT COMPONENTS
1 x INPINZANI - Pliers
20 x INCO432 - M4 x 41 Ø 8
20 x INCO537 - M5 x 46 Ø 10

DESCRIPTION
INDEMOLL metal clamp and dowel kit for fixing to hollow elements such as gypsum board, hollow brick, chipboard, drywall, plasterboard, etc. The careful design of these metal dowels allows maximum load on thin-walled base materials.

This type of anchor has a self-expanding system to ensure a strong and secure fixing. Installation is very simple, fast and controlled by means of an INPISANIN installation gun. After installation, the screw can be replaced by another of the same metric. Some examples of the uses that this fixing can have are the fixing of pictures, wall lights, air conditioning evaporators, televisions, etc.

This product is made of steel with a zinc surface coating that provides protection against rust and extends its useful life.

The installation of this product is very simple, the first step is to drill the base material to the specified diameter. Do not use hammer action. The next step is to insert the anchor by hand until it butts against the base material and tap it gently with a hammer until the grooves on the inside of the head are driven into the base material. Subsequently, the head of the screw should be placed in the installation gun. Operate the gun until the anchor is fully expanded, taking care not to pull it out. Finally, remove the gun and unscrew the screw to place the element to be fixed.

Available in different sizes from M4 x 30 Ø 8 to M6 x 59 Ø 12. Also available in versions with screw, slotted Ph mark, hexagonal head and without screw, as well as a clamp for installation in hard-to-reach places. For installation in hard-to-reach places, the use of the clamp (code INPINZANI) is recommended instead of the gun (code INPISANIN), as it has a smaller volume.