Fastenings for the marine industry and other nautical applications

Anchorages and accessories for marine applications
Our range for the marine industry and other nautical applications incorporates quality solutions designed to adapt to a wide range of situations and to stand the test of time.

  • Approved metal fasteners. We offer the marine industry different options to achieve high performance fastenings. We have male expansion anchors (MT); deformation expansion anchors with female thread (HE); screws for direct fixing to concrete (TH/TF) or for heavy loads (SL). They are approved by independent institutions, which accredit their performance in certain applications: we have options with ETE Opt 7 and ETE Opt 1 approval for use in cracked and non-cracked concrete, seismic C1&C2 or fire resistance, among others.
  • Accessories for cables, chains or ropes. Wide selection of rope clamps, turnbuckles, eyebolts, shackles and carabiners, in different materials and sizes, for working with cables, chains or ropes in nautical applications.
Different coatings according to corrosion level
The choice of material is particularly relevant in nautical applications, where anchorages can be exposed to very demanding weather conditions. Our catalogue of solutions for this sector groups different coating options in order to be able to choose the most suitable for the environment.

  • Very low corrosion level (C1): Zinc-plated, phosphated or plasticised anchors. Suitable for indoor use without condensation.
  • Low corrosion level (C2): Atlantis C2 coated, bichromated or galvanised anchors. Suitable for interiors with temporary condensation or exteriors with very low contamination.
  • Medium corrosion level (C3): Atlantis C3 coated anchors or AISI 430 stainless steel anchors. Suitable for exteriors with low contamination.
  • High corrosion level (C4): Atlantis C4-M coated anchors or A2 (AISI 304) stainless steel anchors. Suitable for exteriors with a moderate concentration of contamination.
  • Very high corrosion level (C5): A4 (AISI 316) stainless steel anchors. Suitable for coastal areas, exteriors with heavy industrial pollution or areas close to roads.

products

CT1024BI9975 1 01 01 MTP MTP SZ8

MTP

Through bolt anchor for heavy loads in cracked & uncracked concrete
CT1025BI9962 1 01 02 MTH MTH SZ8

MTH

Through bolt anchor for heavy loads in uncracked concrete
CT1026BI9958 1 01 03 MTA MTA SZ8

MTA

Through bolt anchor for heavy loads
CT1028BI9671 1 01 05 MT AC MT AC SZ8

MT-AC

Accesories for through bolt anchor for heavy loads MT
CT1030BI15998 1 01 07 TX TX SZ8

TX

Bimetal concrete screw anchor (Stainless steel A4 body and hardened carbon steel point)
CT1031BI16000 1 01 08 TH TH SZ8

TH

Concrete screw anchor with ATLANTIS C3-H coating
CT1032BI15999 1 01 09 TF TF SZ8

TF

Concrete screw anchor with zinc plated coating
CT1035BI10141 1 01 12 SL SL SZ8

SL

Heavy duty anchor for high perfomance in concrete
CT1037BI9829 1 01 14 HE HE SZ8

HE

Drop-in anchor with internal thread for heavy loads
CT1105BI10139 1 08 01 SJ SJ SZ8

SJ

Wire rope clip DIN 741
CT1106BI10137 1 08 02 SJ P SJ P SZ8

SJ-P

Flat cable clip
CT1107BI10320 1 08 03 TS GA TS GA SZ8

TS-GA

Turnbuckle hook/ring DIN-1480
CT1108BI10318 1 08 04 TS AA TS AA SZ8

TS-AA

Turnbuckle ring/ring DIN-1480
CT1109BI10322 1 08 05 TS GG TS GG SZ8

TS-GG

Turnbuckle hook/hook DIN-1480
CT1110BI10324 1 08 06 TS VS TS VS SZ8

TS-VS

Welding rod turnbuckle
CT1111BI9712 1 08 07 EV H EV H SZ8

EV-H

Ring nut D-582
CT1112BI9714 1 08 08 EV M EV M SZ8

EV-M

Ring nut D-580
CT1113BI9811 1 08 09 GR GR SZ8

GR

Straight shackle
CT1114BI9786 1 08 10 GD GD SZ8

GD

Thimble DIN-6899/A
CT1115BI9789 1 08 11 GI GI SZ8

GI

Lyre shackle
CT1116BI12110 1 08 12 GS GS SZ8

GS

Zinc plated “S”
CT1117BI9949 1 08 13 MQ MQ SZ8

MQ

Firefighter carabiner
Metal fixings
Fixings for steel structures
Chemical fixings
Plastic fixings
Fixings and accessories for thermal insulation systems (ETICS)
Fixings & accesories for plasterboard
Rivets
Rigging and hardware
Accesories for fences and trellis
Greenhouse cultivation
Fencing and Cages
Fixings & accesories for Drywall
Direct fixing
Screws for decking and façades
Drill, tapping and PVC screws
Wood screws
Nails and bolts
Wood connectors
Standardized nuts and bolts
Plugs, tips and accessories
Heavy metal clamps
Light metal clamps
Fire protection systems
Gutter supports
Plastic clamps
Profiles and supports
Installation systems and fixings for solar panels
Threaded rod and fixing accesories
Bathroom and air conditioning fixings
DIY

TECHNICAL TRAINING

Our engineering department provides specific and personalised training on the different topics related to fixing systems: metallic or chemical fixings, installation systems, regulations, calculations, etc.

 

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more

site visits

The relationship with our customers does not end with the sale of our products. At INDEX® we understand that it is often necessary to accompany them on site, where our experience is the best ally to ensure fits works perfectly. Our engineers and technicians support the managers of each project in planning and selecting the best solution for effectively saving time and money.

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more

ENGINEERING SERVICES AND CALCULATIONS

TÉCNICAS EXPANSIVAS S.L. informs that the personal data provided voluntarily on this website will be processed and incorporated into the corresponding files, responsibility of TÉCNICAS EXPANSIVAS S.L, is reported at the time of personal data collection, although, according to the specific case, its purpose may be any of the following: attention to your referred request, complaint or question, established relationship maintenance, comprehensive and commercial customer management, accounting and billing or sending communications, including electronic media, news and activities related to TÉCNICAS EXPANSIVAS S.L.

The data in our files are strictly confidential and shall be treated with the utmost confidentiality and shall comply with all the requirements provided for the General Data Protection Regulation (GDPR) 2016.

According to Data Protection legislation, you are strongly advised not to send high-level personal data, such as those relating to health, as they are not encoded or encrypted. Should these details be sent, it is done so under your sole responsibility.

The user may at any time exercise their rights of access, rectification, cancellation and opposition under the provisions of the General Data Protection Regulation (GDPR) 2016 by sending a letter together with a photocopy of your ID, to P.I. La Portalada II | c/ Segador 13, 26006 | Logroño (La Rioja).
Read more